Cantilever Stripping
Stripping procedure for reinforced concrete
Cantilevered Panel1 Leave safety chains in place and remove Safety Toggle Pin. Release the Load Support Key using the ADT Tool and drop the Panel.
2 While tied off with your Safety Lanyard, remove the lower Guard Rail.
3 Free The Mounting Shoe from the slab.
4 Using the Cantilever Post, rotate the Panel downward into the vertical
position.5 Remove the remaining Cantilever components and recycle them to the next floor.
- Introduction Part 1
- Introduction Part 2
- Safe, Fast, Efficient
- Erection
- Bracing and Blocking
- Stripping
- Shoring, Backshoring, Reshoring
- Cantilever
- Cantilever Erection
- Cantilever Stripping
- Ramps
- Pioneer High Floor System
- Infill Components
- Architectural Bridge Strips
- Props
- Panel Surface Options
- Panels Part 2
- Beam Hangers Part 1
- Cantilever Components
- Beam Hangers Part 2
- Architectural Bridge Strips
- TAblA Code of Safe Practices
- TAbla Safety Notices